Fraktpris på dette produktet: Fra 1800,- Merk at avvik på frakt kan forekomme. Sentrifugalkraft: 65 kN - Arbeidsbredde: 65 cm - Vekt: 475 kg Se også CR7 og CR7MDM ! Overlegen slagkraft og økonomisk CR 7 imponerer som en økonomisk maskin som gir kraftig komprimeringsytelse. CR 7 CCD 2.0
The soil compactors CR 6, CR 7, CR 8 and CR 9 with MDM engine protection and COMPATROL® 2.0 offer extensive safety precautions. In case of low engine oil pressure, high engine temperature or heavily soiled air filter, the Hatz diesel engine switches off automatically. If an error occurs, it is signaled by a LED indicator to the operator. Engine damages caused by inadequate maintenance, belong to the past. Life time and operational reliability of the engine are significantly extended.
The green LED indicates that the soil compactor is ready for use.
Display before next maintenance time. 10 hours before the maintenance time has been reached (first maintenance at 150 operating hours), the LED flashes. The service date will be displayed for 5 seconds, then switches over to hour meter. After engine start only the operating hours are displayed.
Switch off the machine on the ignition lock.
Resetting the maintenance time using a magnet.
MDM display can be changed (e.g. by external damage).
Ignition lock can be changed easily.
COMPATROL® is based on a frequency band analysis and consists of a display (CCD Compaction Control Display) and an accelerometer. COMPATROL® measures the acceleration increase or decrease of the base plate, compares the measuring with the soil conditions registered by the system and convert it to “electrical voltage”. The result is easily shown in the display: If the number of flashing diodes does not increase, it indicates to the operator that the maximum compaction has been achieved on that soil with this machine.
COMPATROL® 2.0 – the extension of the compaction control to the active motor protection MDM applies to the soil compactor of the series CR 6 to CR 9.
COMPATROL® is not replacement for conventional testing methods, but provides you an useful addition to the quality assurance.
Automatic function check of the machine.
Automatic frequency check of the machine. (Green LED flashes until optimum frequency is reached).